Buick Hydraulic Flat Tappet Camshaft
Out of stock
SKU
52241
Buick - 400, 430 & 455
Performance level 3 - High Performance Compu-Pro - Intended for the hot street application, these cams offer extended rpm range with emphasis on upper bottom and top end power.
INT/EXH - Dur @ .050” Lift: 230°/236° RR: 1.6/1.6 Gross Lift: .514”/.525” LSA: 112° RPM: 1800 to 4500 Redline: 5000
Performance level 3 - High Performance Compu-Pro - Intended for the hot street application, these cams offer extended rpm range with emphasis on upper bottom and top end power.
INT/EXH - Dur @ .050” Lift: 230°/236° RR: 1.6/1.6 Gross Lift: .514”/.525” LSA: 112° RPM: 1800 to 4500 Redline: 5000
$295.32
Related Products
Check items to add to the cart or
Part Number
52241
Engine Make
Buick
Year
1967-1976
Part Class
Camshaft
Camshaft Name
High Performance Compu-Pro
Camshaft Series
Compu-Pro
Engine Type
V8
Engine Size
400, 430 & 455
Product Type
Hydraulic Flat Tappet
Valve Lash
.000" intake and .000" exhaust
Lobe center
112
Advertised Duration: Intake / Exhaust
284/290
Duration @ .050" Lift: Intake / Exhaust
230/236
Lobe Lift: Intake / Exhaust
.321/.328
Rocker Ratio: Intake / Exhaust
1.6/1.6
Gross Valve Lift: Intake / Exhaust
.514/.525
CID
455
Performance Level
3
Low RPM
1800
Peak HP
4500
Redline
5500
Performance Description
Intended for the hot street application, these cams offer extended rpm range with emphasis on upper bottom and top end power.
Engine Application
Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications.
Recommended Modifications
These higher lift and longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. Automatic transmissions with an aftermarket high stall torque converter and manual transmissions. Headers, dual exhaust, larger than stack carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.
Grind Number
284HDP
Recommended Kit #1
84052
Write Your Own Review