Chevrolet Mechanical Flat Tappet Camshaft
Out of stock
SKU
00356S
Chevrolet - 262, 267, 283, 302, 305, 307, 327, 350 & 400
Performance level 5 - Compu-Pro - Super torque at higher revs. Fast track cam.
INT/EXH - Dur @ .050” Lift: 260°/266° RR: 1.5/1.5 Gross Lift: .540”/.557” LSA: 105° RPM: 3500 to 7500 Redline: 7500
Performance level 5 - Compu-Pro - Super torque at higher revs. Fast track cam.
INT/EXH - Dur @ .050” Lift: 260°/266° RR: 1.5/1.5 Gross Lift: .540”/.557” LSA: 105° RPM: 3500 to 7500 Redline: 7500
$262.38
Related Products
Check items to add to the cart or
Part Number
00356S
Engine Make
Chevrolet
Year
1957-1998
Part Class
Camshaft
Engine Class
Small Block
Camshaft Name
Compu-Pro
Camshaft Series
Compu-Pro
Engine Type
V8
Engine Size
262, 267, 283, 302, 305, 307, 327, 350 & 400
Product Type
Mechanical Flat Tappet
Special Note
This cam has a smaller than stock base circle
Valve Lash
.022" intake and .024" exhaust
Lobe center
105
Advertised Duration: Intake / Exhaust
294/302
Duration @ .050" Lift: Intake / Exhaust
260/266
Lobe Lift: Intake / Exhaust
.360/.371
Rocker Ratio: Intake / Exhaust
1.5/1.5
Gross Valve Lift: Intake / Exhaust
.540/.557
CID
350
Performance Level
5
Low RPM
3500
Peak HP
7500
Redline
7500
Performance Description
Super torque at higher revs. Fast track cam.
Engine Application
Level 5 camshafts are designed for fully prepared, high compression all-out racing engines and chassis.
Recommended Modifications
Extensive cylinder head modification, bigger titanium valves, lightweight valve train, maximum flow carburetion or fuel injection, racing gas (alcohol or nitro), magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.
CID #2
400
Performance Level 2
5
Performance Description 2
Super torque at higher revs. Fast track cam.
Engine Application 2
Level 5 camshafts are designed for fully prepared, high compression all-out racing engines and chassis.
Recommended Modifications 2
Extensive cylinder head modification, bigger titanium valves, lightweight valve train, maximum flow carburetion or fuel injection, racing gas (alcohol or nitro), magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.
Grind Number
294FDP
Recommended Kit #1
84299
Write Your Own Review